Pubblicazioni

RIVISTE INTERNAZIONALI

1. F. Sbardella, M. Lilli, M. C. Seghini, I. Bavasso, F. Touchard, L. Chocinski-Arnault, I. Rivilla, J. Tirillò, F. Sarasini, “Interface tailoring between flax yarns and epoxy matrix by ZnO nanorods.” Composites Part A: Applied Science and Manufacturing, 140, 106156, 2021.

2. M. Lilli, F. Sarasini, L. Di Fausto, C. González, A. Fernández, C. S. Lopes, J. Tirillò, “Chemical Regeneration of Thermally Conditioned Basalt Fibres.” Applied Sciences, 10(19), 6674, 2020.

3. C. Sergi, F. Sbardella, M. Lilli, J. Tirillò, A. Calzolari, F. Sarasini, “Hybrid Cellulose–Basalt Polypropylene Composites with Enhanced Compatibility: The Role of Coupling Agent.” Molecules, 25(19), 4384, 2020.

4. M. Lilli, E. Rossi, J. Tirillò, F. Sarasini, L. Di Fausto, T. Valente, C. González, A. Fernández, C.S. Lopes, R. Moscatelli, E. Bemporad, M. Sebastiani, “Quantitative multi-scale characterization of single basalt fibres: Insights into strength loss mechanisms after thermal conditioning.” Materials Science and Engineering: A, 797, 21, 139963, 2020.

5. M. Lilli, F. Sbardella, I. Bavasso, M.P. Bracciale, C. Scheffler, I. Rivilla, J. Tirillò, W. Xin, I.M. De Rosa, F. Sarasini, “Tailoring the interfacial strength of basalt fibres/epoxy composite with ZnO-nanorods.” Composite Interfaces, 2020. Doi: 10.1080/09276440.2020.1805217.

6. S. Pompei, J. Tirillò, F. Sarasini, C. Santulli, “Development of Thermoplastic Starch (TPS) Including Leather Waste Fragments.” Polymers, 12, 1811, 2020.

7. M. C. Seghini, F. Touchard, F. Sarasini, L. Chocinski–Arnault, M. R. Ricciardi, V. Antonucci, J. Tirillò, “Fatigue behaviour of flax-basalt/epoxy hybrid composites in comparison with non-hybrid composites.” International Journal of Fatigue, 139, 105800, 2020.

8. V. Mazzanti, L. Malagutti, A. Santoni, F. Sbardella, A. Calzolari, F. Sarasini, F. Mollica, “Correlation between Mechanical Properties and Processing Conditions in Rubber-Toughened Wood Polymer Composites.” Polymers, 12, 1170, 2020.

9. N. Graupner, F. Sarasini, J. Müssig, “Ductile viscose fibres and stiff basalt fibres for composite applications – An overview and the potential of hybridization.” Composites Part B, 194, 108041, 2020.

10. M.C. Seghini, J. Tirillò, M.P. Bracciale, F. Touchard, L. Chocinski-Arnault, A. Zuorro, R. Lavecchia, F. Sarasini, “Surface modification of flax yarns by enzymatic treatment and their interfacial adhesion with thermoset matrices.” Applied Sciences, 10(8), 2910, 2020.

11. F. Dominici, F. Sarasini, F. Luzi, L. Torre, D. Puglia, “Thermomechanical and Morphological Properties of Poly(ethylene terephthalate)/Anhydrous Calcium Terephthalate Nanocomposites.” Polymers, 12(2), 276, 2020.

12. P. Russo, L. Vitiello, F. Sbardella, J. I. Santos, J. Tirillò, M. P. Bracciale, I. Rivilla, F. Sarasini, “Effect of Carbon Nanostructures and Fatty Acid Treatment on the Mechanical and Thermal Performances of Flax/Polypropylene Composites.” Polymers, 12(2), 438, 2020.

13. M.C. Seghini, F. Touchard, L. Chocinski-Arnault, V. Placet, C. François, L. Plasseraud, M.P. Bracciale, J. Tirillò, F. Sarasini, “Environmentally friendly surface modification treatment of flax fibers by supercritical carbon dioxide.” Molecules, 25(3), 438, 2020.

14. I. Papa, M.R. Ricciardi, V. Antonucci, A. Langella, J. Tirillò, F. Sarasini, V. Pagliarulo, P. Ferraro, V. Lopresto, “Comparison between different non-destructive techniques methods to detect and characterize impact damage on composite laminates.” Journal of Composite Materials, 54(5), 617-631, 2020.

15. S. Boria, C. Santulli, E. Raponi, F. Sarasini, J. Tirillò, “Analytical modeling and experimental validation of the low-velocity impact response of hemp and hemp/glass thermoset composites.” Journal of Composite Materials, 54(3), 409-421, 2020.

16. E. Ramasso, P. Butaud, T. Jeannin, F. Sarasini, V. Placet, N. Godin, J. Tirillò, X. Gabrion, “Learning the representation of raw acoustic emission signals by direct generative modelling and its use in chronology-based clusters identification.” Engineering Applications of Artificial Intelligence, 90, 103478, 2020.

17. W. Xin, F. Sarasini, J. Tirillò, I. Bavasso, F. Sbardella, L. Lampani, I.M. De Rosa, “Impact and post-impact properties of multiscale carbon fiber composites interleaved with carbon nanotube sheets.” Composites Part B, 107711, 2020.

18. F. Sarasini, J. Tirillò, I. Bavasso, M. P. Bracciale, F. Sbardella, L. Lampani, G. Cicala, “Effect of electrospun nanofibres and MWCNTs on the low velocity impact response of carbon fibre laminates.” Composite Structures, 234, 111776, 2020.

19. M.C. Seghini, F. Touchard, F. Sarasini, L. Chocinski-Arnault, J. Tirillò, M.P. Bracciale, M. Zvonek, V. Cech, “Effects of oxygen and tetravinylsilane plasma treatments on mechanical and interfacial properties of flax yarns in thermoset matrix composites.” Cellulose, 27(1), 511-530, 2020.

20. I. Bavasso, M. P. Bracciale, F. Sbardella, J. Tirillò, F. Sarasini, L. Di Palma, “Effect of yerba mate (Ilex paraguariensis) residue and coupling agent on the mechanical and thermal properties of polyolefin-based composites.” Polymer Composites, 41(1), 161-173, 2020.

21. C. Sergi, J. Tirillò, F. Sarasini, E. Barbero Pozuelo, S. Sanchez Saez, C. Burgstaller, “The Potential of Agglomerated Cork for Sandwich Structures: A Systematic Investigation of Physical, Thermal, and Mechanical Properties.” Polymers, 11, 2118, 2019.

22. F. Sarasini, J. Tirillò, L. Lampani, E. Barbero, S. Sanchez-Saez, T. Valente, P. Gaudenzi, C. Scarponi, “Impact behavior of sandwich structures made of flax/epoxy face sheets and agglomerated cork.” Journal of Natural Fibers, 17(2), 168-188, 2020.

23. F. Dominici, D. Puglia, F. Luzi, F. Sarasini, M. Rallini, L. Torre, “A Novel Class of Cost Effective and High Performance Composites Based on Terephthalate Salts Reinforced Polyether Ether Ketone.” Polymers, 11, 2097, 2019.

24. I. Bavasso, L. Di Palma, D. Puglia, F. Luzi, F. Dominici, J. Tirillò, F. Sarasini, L. Torre, “Effect of Pretreatment of Nanocomposite PES‐Fe3O4 Separator on Microbial Fuel Cells Performance.” Polymer Engineering and Science, 2019, 10.1002/pen.25292.

25. F. Sarasini, J. Tirillò, L. Ferrante, C. Sergi, F. Sbardella, P. Russo, G. Simeoli, D. Mellier, A. Calzolari, “Effect of temperature and fiber type on impact behavior of thermoplastic fiber metal laminates.” Composite Structures, 223, 110961, 2019.

26. M.C. Seghini, F. Touchard, F. Sarasini, V. Cech, L. Chocinski-Arnault, D. Mellier, J. Tirillò, M.P. Bracciale, M. Zvonek, “Engineering the interfacial adhesion in basalt/epoxy composites by plasma polymerization.” Composites Part A, 122, 67-76, 2019.

27. C. Sergi, J. Tirillò, M. C. Seghini, F. Sarasini, V. Fiore, T. Scalici, “Durability of Basalt/Hemp Hybrid Thermoplastic Composites.” Polymers, 11, 1-17, 2019.

28. F. Sarasini, J. Tirillò, L. Ferrante, C. Sergi, P. Russo, G. Simeoli, F. Cimino, M. R. Ricciardi, V. Antonucci, “Quasi-Static and Low-Velocity Impact Behavior of Intraply Hybrid Flax/Basalt Composites.” Fibers, 7, 1-16, 2019.

29. G. Barbirato, J. Fiorelli, J. Mejia, F. Sarasini, J. Tirillò, L. Ferrante, “Quasi-static and dynamic response of oriented strand boards based on balsa wood waste.” Composite Structures, 219, 83–89, 2019.

30. B. Yousefi, S. Sfarra, F. Sarasini, C. Ibarra Castanedo, X.P.V. Maldague, “Low-Rank Sparse Principal Component Thermography (Sparse-PCT): Comparative assessment on detection of subsurface defects.” Infrared Physics and Technology, 98, 278–284. 2019.

31. F. Sarasini, J. Tirillò, G. Maffei, A. Zuorro, R. Lavecchia, F. Luzi, D. Puglia, L. Torre, A. Maghchiche, “Thermal and Mechanical Behavior of Thermoplastic Composites

Reinforced with Fibers Enzymatically Extracted from Ampelodesmos mauritanicus.” Polymer Engineering and Science, doi: 10.1002/pen.25093.

32. A.O. Chulkov, S. Sfarra, H. Zhang, A. Osman, K. Szielasko, C. Stumm, F. Sarasini, J. Fiorelli, X.P.V. Maldague, V.P. Vavilov, “Evaluating thermal properties of sugarcane bagasse-based composites by using active infrared thermography and terahertz imaging.” Infrared Physics & Technology, 97, 432-439, 2019.

33. F. Luzi, D. Puglia, F. Sarasini, J. Tirillò, G. Maffei, A. Zuorro, R. Lavecchia, J.M. Kenny, L. Torre, “Valorization and extraction of cellulose nanocrystals from North African grass: Ampelodesmos mauritanicus (Diss).” Carbohydrate Polymers, 209, 328–337, 2019.

34. T. Cecchi, A. Giuliani, F. Iacopini, C. Santulli, F. Sarasini, J. Tirillò, “Unprecedented high percentage of food waste powder filler in poly lactic acid green composites: synthesis, characterization, and volatile profile.” Environmental Science and Pollution Research, 26, 7263–7271, 2019.

35. S. Boria, C. Santulli, E. Raponi, F. Sarasini, J. Tirillò, “Evaluation of a new green composite solution for wind turbine blades.” Multiscale and Multidisciplinary Modeling, Experiments and Design, 10.1007/s41939-019-00043-4, 2019.

36. F. Sarasini, J. Tirillò, L. Lampani, M. Sasso, E. Mancini, C. Burgstaller, A. Calzolari, “Static and dynamic characterization of agglomerated cork and related sandwich structures.” Composite Structures, 212, 439-451, 2019.

37. B. Fischer, F. Sarasini, J. Tirillò, F. Touchard, L. Chocinski-Arnault, D. Mellier, N. Panzer, R. Sommerhuber, P. Russo, I. Papa, V. Lopresto, R. Ecault, “Impact damage assessment in biocomposites by micro-CT and innovative air-coupled detection of laser-generated ultrasound.” Composite Structures, 210, 922-931, 2019.

38. D. Derusova, V. Vavilov, S. Sfarra, F. Sarasini, V. Krasnoveikin, A. Chulkov, S. Pawar, “Ultrasonic spectroscopic analysis of impact damage in composites by using laser vibrometry.” Composite Structures, 211, 221-228, 2019.

39. P.-J. Liotier, M.F. Pucci, A. Le Duigou, A. Kervoelen, J. Tirilló, F. Sarasini, S. Drapier, “Role of interface formation versus fibres properties in the mechanical behaviour of bio-based composites manufactured by Liquid Composite Molding processes.” Composites Part B, 163, 86-95, 2019.

40. H. Zhang, S. Sfarra, A. Osman, F. Sarasini, U. Netzelmann, B. Valeske, N. P. Avdelidis, C. Ibarra-Castanedo, X. Maldague, “Nondestructive evaluation of low-velocity impact-induced damage in basalt-carbon hybrid composite laminates using eddy current-pulsed thermography.” Optical Engineering, 58(4), 041602, 2019.

41. F. Sarasini, F. Luzi, F. Dominici, G. Maffei, A. Iannone, A. Zuorro, R. Lavecchia, L. Torre, A. Carbonell-Verdu, R. Balart, D. Puglia, “Effect of Different Compatibilizers on Sustainable Composites Based on a PHBV/PBAT Matrix Filled with Coffee Silverskin.” Polymers, 10(11), 1256, 2018.

42. H. Zhang, S. Sfarra, A. Osman, K. Szielasko, C. Stumm, F. Sarasini, C. Santulli, X. P.V. Maldague, “Terahertz Amplitude Polynomial Principle Component Regression for Aramid-Basalt Hybrid Composite Laminate Inspection.” IEEE Transactions on Industrial Informatics, 2018. doi: 10.1109/TII.2018.2870670.

43. M.C. Seghini, F. Touchard, F. Sarasini, L. Chocinski-Arnault, D. Mellier, J. Tirillò, “Interfacial adhesion assessment in flax/epoxy and in flax/vinylester composites by single yarn fragmentation test: Correlation with micro-CT analysis.” Composites Part A: Applied Science and Manufacturing, 113, 66-75, 2018.

44. F. Sarasini, V. Fiore, “A systematic literature review on less common natural fibres and their biocomposites.” Journal of Cleaner Production, 195, 240-267, 2018.

45. L. Lampani, F. Sarasini, J. Tirillò, P. Gaudenzi, “Analysis of damage in composite laminates with embedded piezoelectric patches subjected to bending action.” Composite Structures, 202, 935-942, 2018

46. D.A. Derusova, V.P. Vavilov, S. Sfarra, F. Sarasini, N.V. Druzhinin, “Applying ultrasonic resonance vibrometry for the evaluation of impact damage in natural/synthetic fibre reinforced composites.” Polymer Testing, 68, 70-76, 2018.

47. F. Sarasini, J. Tirillò, A. Zuorro, G. Maffei, R. Lavecchia, D. Puglia, F. Dominici, F. Luzi, T. Valente, L. Torre, “Recycling coffee silverskin in sustainable composites based on a poly(butylene adipate-co-terephthalate)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrix.” Industrial Crops and Products, 118, 311-320, 2018.

48. H. Zhang, S. Sfarra, A. Osman, F. Sarasini, U. Netzelmann, S. Perilli, C. Ibarra-Castanedo, X. P. V. Maldague, “Eddy current pulsed thermography for ballistic impact evaluation in basalt-carbon hybrid composite panels.” Applied Optics, 57(18/20), D74-D81, 2018.

49. F. Sarasini, J. Tirillò, C. Sergi, M.C. Seghini, L. Cozzarini, N. Graupner, “Effect of basalt fibre hybridisation and sizing removal on mechanical and thermal properties of hemp fibre reinforced HDPE composites.” Composite Structures, 188, 394-406, 2018.

50. H. Zhang, S. Sfarra, F. Sarasini, C. Santulli, H. Fernandes, N.P. Avdelidis, C. Ibarra-Castanedo, X.P.V. Maldague, “Thermographic Non-Destructive Evaluation for Natural Fiber-Reinforced Composite Laminates.” Applied Sciences, 8(2), 240, 2018.

51. L. Di Palma, I. Bavasso, F. Sarasini, J. Tirillò, D. Puglia, F. Dominici, L. Torre, “Synthesis, characterization and performance evaluation of Fe3O4/PES nano composite membranes for microbial fuel cell.” European Polymer Journal, 99, 222–229, 2018.

52. L. Benussi, S. Bianco, G. Saviano, S. Muhammad, D. Piccolo, G. Raffone, M. Caponero, L. Passamonti, D. Pierluigi, A. Russo, F. Primavera, S. Cerbelli, A. Lalli, M. Valente, M. Ferrini, B. Teissandier, M. Taborelli, M. Parvis, S. Grassini, J. Tirillò, F. Sarasini, A. V. Franchi, “Characterization of the water diffusion in GEM foil material.” EPJ Web of Conferences, 174, 03005, 2018.

53. H. Zhang, S. Sfarra, F. Sarasini, C. Ibarra-Castanedo, S. Perilli, H. Fernandes, Y. Duan, J. Peeters, N.P. Avelidis, X. Maldague, “Optical and Mechanical Excitation Thermography for Impact Response in Basalt-Carbon Hybrid Fiber-Reinforced Composite Laminates.” IEEE Transactions on Industrial Informatics, 14(2), 514-522, 2018.

54. L. Di Palma, I. Bavasso, F. Sarasini, J. Tirillò, D. Puglia, F. Dominici, L. Torre, A. Galluzzi, M. Polichetti, M.A. Ramazanov, F. V. Hajiyeva, H. Shirinova, “Effect of nano-magnetite particle content on mechanical, thermal and magnetic properties of polypropylene composites.” Polymer Composites, 39, E1742–E1750, 2018.

55. H. Zhang, S. Sfarra, F. Sarasini, J. Fiorelli, J. Peeters, N.P. Avdelidis, D. de Lucca Sartori, C. Ibarra-Castanedo, S. Perilli, Y. Mokhtari, J. Tirillò, X.P. Maldague, “Impact modelling and a posteriori non-destructive evaluation of homogeneous particleboards of sugarcane bagasse.” Journal of Nondestructive Evaluation 37:6, 2018.

56. M. Sasso, E. Mancini, G. Chiappini, F. Sarasini, J. Tirillò, “Application of DIC to static and dynamic testing of agglomerated cork material.” Experimental Mechanics, 2018. doi: 10.1007/s11340-017-0369-9.

57. F. Sarasini, J. Tirillò, M.C. Seghini, “Influence of thermal conditioning on tensile behaviour of single basalt fibres.” Composites Part B: Engineering, 132, 77-86, 2018.

58. G. Saviano, S. Muhammad, S. Bianco, L. Benussi, D. Piccolo, M.A. Caponero, L. Passamonti, D. Pierluigi, A. Russo, A. Lalli, M. Valente, F. Sarasini, F. Marra, J. Tirillò, M. Ferrini, A. Sharma, S.A.E. Langeslag, S. Sgobba, I.A. Santillana and I. Vai, “A study of mechanical properties of foil materials for the GEM detector proposed for the CMS muon system upgrade at LHC.” Polymer Engineering & Science, 2017. doi: 10.1002/pen.24739.

59. C. Scarponi, C. Santulli, F. Sarasini, J. Tirillò, “Green composites for aircraft interior panels.” International Journal of Sustainable Aviation, 3, 252–270, 2017.

60. S. Boria, C. Santulli, F. Sarasini, J. Tirillò, A.P. Caruso, M. Infantino, “Potential of wool felts in combination with glass fibres: Mechanical and low velocity impact assessment.” Composites Part B: Engineering, 118, 158-168, 2017.

61. J. Tirillò, L. Ferrante, F. Sarasini, L. Lampani, E. Barbero, S. Sánchez-Sáez, T. Valente, P. Gaudenzi, “High velocity impact behaviour of hybrid basalt-carbon/epoxy composites.” Composite Structures,168, 305-312, 2017.

62. F. Sarasini, J. Tirillò, D. Puglia, F. Dominici, C. Santulli, K. Boimau, T. Valente, L. Torre, “Biodegradable polycaprolactone-based composites reinforced with ramie and borassus fibres.” Composite Structures, 167, 20-29, 2017.

63. L. Sorrentino, D. Silva de Vasconcellos, M. D’Auria, J. Tirillò, F. Sarasini, “Flexural and low velocity impact characterization of thermoplastic composites based on PEN and high performance woven fabrics.” Poymer Composites, in press. doi: 10.1002/pc.24293, 2017.

64. V. Fiore, T. Scalici, F. Sarasini, J. Tirilló, L. Calabrese, “Salt-fog spray aging of jute-basalt reinforced hybrid structures: Flexural and low velocity impact response.” Composites Part B: Engineering, in press. doi: 10.1016/j.compositesb.2017.01.031, 2017.

65. L. Sorrentino, D. Silva de Vasconcellos, M. D’Auria, F. Sarasini, J. Tirillò, “Effect of temperature on static and low velocity impact properties of thermoplastic composites.” Composites Part B: Engineering, 113, 100-110, 2017.

66. L. Sorrentino, F. Sarasini, J. Tirillò, F. Touchard, L. Chocinski-Arnault, D. Mellier, P. Russo, “Damage tolerance assessment of the interface strength gradation in thermoplastic composites.” Composites Part B: Engineering, 113, 111-122, 2017.

67. M. F. Pucci, M. C. Seghini, P.-J. Liotier, F. Sarasini, J. Tirilló, S. Drapier, “Surface characterisation and wetting properties of single basalt fibres.” Composites Part B: Engineering, 109, 72-81, 2017.

68. F. Sarasini, J. Tirillò, L. Lampani, T. Valente, P. Gaudenzi, C. Scarponi, “Dynamic Response of Green Sandwich Structures.” Procedia Engineering, 167, 237-244, 2016.

69. L. Sorrentino, D. Silva de Vasconcellos, M. D’Auria, F. Sarasini, S. Iannace, “Thermoplastic composites based on poly(ethylene 2,6-naphthalate) and basalt woven fabrics: static and dynamic mechanical properties.” Polymer Composites, 37, 2549-2556, 2016.

70. S. Sfarra, C. Ibarra-Castanedo, F. Sarasini, C. Santulli, X.P.V. Maldague, “Basalt fibre laminates non-destructively inspected after low velocity impacts.” FME Transactions, 44, 380-385, 2016.

71. H. Shirinova, L. Di Palma, F. Sarasini, J. Tirillò, M. A. Ramazanov, F. Hajiyeva, D. Sannino, M. Polichetti, A. Galluzzi, “Synthesis and characterization of magnetic nanocomposites for environmental remediation.” Chemical Engineering Transactions, 47, 103-108, 2016.

72. L. Ferrante, F. Sarasini, J. Tirillò, L. Lampani, T. Valente, P. Gaudenzi, “Low velocity impact response of basalt-aluminium fibre metal laminates.” Materials and Design, 98, 98–107, 2016.

73. S. Sfarra, M. Regi, C. Santulli, F. Sarasini, J. Tirillò, S. Perilli, “An innovative non-destructive perspective for the prediction of the effect of environmental aging on impacted composite materials.” International Journal of Engineering Science, 102, 55-76, 2016.

74. F. Sarasini, J. Tirillò, S. D’Altilia, T. Valente, C. Santulli, F. Touchard, L. Chocinski-Arnault, D. Mellier, L. Lampani, P. Gaudenzi, “Damage tolerance of carbon/flax hybrid composites subjected to low velocity impact.” Composites Part B: Engineering, 91, 144-153, 2016.

75. C. Scarponi, F. Sarasini, J. Tirillò. L. Lampani, T. Valente, P. Gaudenzi, “Low-velocity impact behaviour of hemp fibre reinforced bio-based epoxy laminates.” Composites Part B: Engineering, 91, 162-168, 2016.

76. P. Gaudenzi, D. Nardi, I. Chiappetta, S. Atek, L. Lampani, M. Pasquali, F. Sarasini, J. Tirilló, T. Valente, “Sparse sensing detection of impact-induced delaminations in composite laminates.” Composite Structures, 133, 1209–1219, 2015.

77. L. Baiamonte, F. Marra, G. Pulci, J. Tirillò, F. Sarasini, C. Bartuli, T. Valente, “High temperature mechanical characterization of plasma-sprayed zirconia–yttria from conventional and nanostructured powders.” Surface and Coatings Technology, 277, 289-298, 2015.

78. R. Petrucci, E. Nisini, D. Puglia, F. Sarasini, M. Rallini, C. Santulli, G. Minak, J.M. Kenny, “Tensile and fatigue characterisation of textile cotton waste/polypropylene laminates.” Composites Part B: Engineering, 81, 84–90, 2015.

79. H.M. Dhakal, F. Sarasini, C. Santulli, J. Tirillò, Z. Zhang, V. Arumugam, “Effect of basalt fibre hybridisation on post-impact mechanical behavior of hemp fibre reinforced composites.” Composites Part A: Applied Science and Manufacturing, 75, 54–67, 2015.

80. F. Sarasini, J. Tirillò, D. Puglia, J.M. Kenny, F. Dominici, C. Santulli, M. Tofani, R. De Santis, “Effect of different lignocellulosic fibres on poly(ε-caprolactone)-based composites for potential applications in orthotics.” RSC Advances, 5, 23798-23809, 2015.

81. L. Ferrante, J. Tirillò, F. Sarasini, F. Touchard, R. Ecault, M.A. Vidal Urriza, L. Chocinski-Arnault, D. Mellier, “Behaviour of woven hybrid basalt-carbon/epoxy composites subjected to laser shock wave testing: preliminary results.” Composites Part B: Engineering, 78, 162-173, 2015.

82. G. Pulci, J. Tirillò, F. Marra, F. Sarasini, A. Bellucci, T. Valente, C. Bartuli, “High temperature oxidation of MCrAlY coatings modified by Al2O3 PVD overlay.” Surface and Coatings Technology, 268, 198-204, 2015.

83. R. Petrucci, C. Santulli, D. Puglia, E. Nisini, F. Sarasini, J. Tirillò, L. Torre, G. Minak, J.M. Kenny, “Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion.” Composites Part B: Engineering, 69, 507-515, 2015.

84. M. L. Santarelli, F. Sbardella, M. Zuena, J. Tirillò, F. Sarasini, “Basalt fiber reinforced natural hydraulic lime mortars: A potential bio-based material for restoration.” Materials and Design, 63, 398-406, 2014.

85. D. Vasconcellos, F. Sarasini, F. Touchard, L. Chocinski-Arnault, M. Pucci, C. Santulli et J. Tirillò, “Fatigue post-impact d’un composite à renfort tissé de fibres de chanvre et matrice époxy.” Matériaux & Techniques 102, 302, 2014.

86. D. S. de Vasconcellos, F. Sarasini, F. Touchard, L. Chocinski-Arnault, M. Pucci, C. Santulli, J. Tirillò, S. Iannace, L. Sorrentino, “Influence of low velocity impact on fatigue behaviour of woven hemp fibre reinforced epoxy composites.” Composites Part B: Engineering, 66, 46-57, 2014.

87. H. Md Akil, C. Santulli, F. Sarasini, J. Tirillò, T. Valente, “Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites.” Composites Science and Technology, 94, 62–70, 2014.

88. F. Sarasini, J. Tirillò, L. Ferrante, M. Valente, T. Valente, L. Lampani, P. Gaudenzi, S. Cioffi, S. Iannace, L. Sorrentino, “Drop-weight impact behaviour of woven hybrid basalt-carbon/epoxy composites.” Composites Part B: Engineering, 59, 204-220, 2014.

89. G. Pulci, J. Tirillò, F. Marra, F. Sarasini, A. Bellucci, T. Valente, C. Bartuli, “High temperature oxidation and microstructural evolution of modified MCrAlY coatings.” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45(3), 1401-1408, 2014.

90. D. Puglia, C. Santulli, F. Sarasini, J. M. Kenny, T. Valente, “Thermal and mechanical characterization of Phormium tenax reinforced polypropylene composites.” Journal of Thermoplastic Composite Materials, 27(11), 1493-1503, 2014.

91. A. Tamburrano, F. Sarasini, G. De Bellis, A. G. D’Aloia, M. S. Sarto, “The piezoresistive effect in graphene-based polymeric composites.” Nanotechnology, 24, Article number 465702, 2013.

92. C. Santulli, F. Sarasini, J. Tirillò, T. Valente, M. Valente, A.P. Caruso, M. Infantino, E. Nisini, G. Minak, “Mechanical behaviour of jute cloth/wool felts hybrid laminates.” Materials and Design, 50, 309-321, 2013.

93. R. Petrucci, C. Santulli, D. Puglia,F. Sarasini, L. Torre, J.M. Kenny, “Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion.” Materials and Design, 49, 728-735, 2013.

94. S. Sfarra, C. Ibarra-Castanedo, C. Santulli, A. Paoletti, D. Paoletti, F. Sarasini, A. Bendada, X. Maldague, “Falling weight impacted glass and basalt fibre woven composites inspected using non-destructive techniques.” Composites Part B: Engineering, 45(1), 601-608, 2013.

95. F. Sarasini, J. Tirillò, M. Valente, L. Ferrante, S. Cioffi, S. Iannace, L. Sorrentino, “Hybrid composites based on aramid and basalt woven fabrics: impact damage modes and residual flexural properties.” Materials and Design, 49, 290-302, 2013.

96. F. Sarasini, J. Tirillò, M. Valente, T. Valente, S. Cioffi, S. Iannace, L. Sorrentino, “Effect of basalt fibre hybridization on the impact behaviour under low impact velocity of glass/basalt woven fabric/epoxy resin composites.” Composites Part A, 47(1), 109-123 2013.

97. S. Sfarra, C. Ibarra-Castanedo, C. Santulli, F. Sarasini, D. Ambrosini, D. Paoletti, X. Maldague. “Eco-friendly laminates: from the indentation to nondestructive evaluation by optical and infrared monitoring techniques.” Strain, 49(2), 175-189, 2013.

98. C. Santulli, H. T. Kuan, F. Sarasini, I.M. De Rosa, W.J. Cantwell, “Damage characterisation on PP-hemp/aluminium fibre metal laminates using acoustic emission.” Journal of Composite Materials, 47(18), 2265-2274, 2013.

99. D. Puglia, M. Monti, C. Santulli, F. Sarasini, I. M. De Rosa, J. M. Kenny, “Effect of alkali and silane treatments on mechanical and thermal behavior of Phormium tenax fibres.” Fibers and Polymers, 14(3), 423-427, 2013.

100. V. Arumugam, C. Suresh Kumar, C. Santulli, F. Sarasini, A. Joseph Stanley, “Identification of failure modes in composites from clustered acoustic emission data using pattern recognition and wavelet transformation.” Arabian Journal for Science and Engineering, 38(5), 1087-1102, 2013.

101. C. Scarponi, E. Schiavoni, S. Sánchez-Sáez, E. Barbero, F. Sarasini, “Polypropylene/hemp fabric reinforced composites: manufacturing and mechanical behaviour.” Journal of Biobased Materials and Bioenergy, 6(4), 361-369, 2012.

102. M. Tului, B. Giambi, S. Lionetti, G, Pulci, F. Sarasini, T. Valente, “Silicon carbide based plasma sprayed coatings.” Surface & Coatings Technology, 207(25), 182-189, 2012.

103. E. Fortunati, D. Puglia, C. Santulli, F. Sarasini, J.M. Kenny, “Biodegradation of phormium tenax/poly(lactic acid) composites.” Journal of Applied Polymer Science, 125 (SUPPL. 2), E562-E572, 2012.

104. P. M. Visakh, M. Monti, D. Puglia, M. Rallini, C. Santulli, F. Sarasini, S. Thomas, J. M. Kenny, “Mechanical and thermal properties of crab chitin reinforced carboxylated SBR composites.” eXPRESS Polymer Letters, 6(5), 396-409, 2012.

105. I. M. De Rosa, F. Marra, G. Pulci, C. Santulli, F. Sarasini, J. Tirillò, M. Valente, “Post-impact mechanical characterisation of glass and basalt woven fabric laminates.” Applied Composite Materials, 19(3-4), 475-490, 2012.

106. C. Santulli, F. Sarasini, “Acoustic emission for monitoring natural fibre composites.” JEC Composites Magazine, 68, October 2011, 81-83.

107. I. M. De Rosa, H. N. Dhakal, C. Santulli, F. Sarasini, Z. Y. Zhang, “Post-impact static and cyclic flexural characterisation of hemp fibre reinforced laminates.” Composites Part B, 43(3), 1382-1396, 2012.

108. C. Santulli, F. Sarasini, D. Puglia, J. M. Kenny, “Adding plant fibers improves thermomechanical properties of poly(lactic acid) matrix.” Plastic Research Online, doi: 10.1002/spepro.003850, 2011.

109. I. M. De Rosa, A. Iannoni, J. M. Kenny, D. Puglia, C. Santulli, F. Sarasini, A. Terenzi, “Poly(lactic acid)/phormium tenax composites: morphology and thermo-mechanical behaviour.” Polymer Composites, 32(9), 1362-1368, 2011.

110. I. M. De Rosa, A. Dell'Era, M. Pasquali, C. Santulli, F. Sarasini, “Acoustic emission monitoring of activation behavior of LaNi5 hydrogen storage alloy.” Science and Technology of Advanced Materials, 12(4), 045004, 2011.

111. V. Arumugam, C. S. Kumar, C. Santulli, F. Sarasini, A. J. Stanley, “A global method for the identification of failure modes in fibreglass using acoustic emission.” Journal of Testing and Evaluation, 39(5), 103730, 2011.

112. M. Valente, F. Sarasini, F. Marra, J. Tirillò, G. Pulci, “Hybrid recycled glass fiber/wood flour thermoplastic composites: Manufacturing and mechanical characterization.” Composites Part A, 42(6), 649-657, 2011.

113. I. M. De Rosa, F. Marra, G. Pulci, C. Santulli, F. Sarasini, J. Tirillò, M. Valente, “Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates.” eXPRESS Polymer Letters, 5(5), 449–459, 2011.

114. I. M. De Rosa, J. M. Kenny, Mohd. Maniruzzaman, Md. Moniruzzaman, M. Monti, D. Puglia, C. Santulli, F. Sarasini, “Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus esculentus) fibres.” Composites Science and Technology, 71(2), 246-254, 2011.

115. S. Carmisciano, I. M. De Rosa, F. Sarasini, A. Tamburrano, M. Valente, “Basalt woven fiber reinforced vinylester composites: Flexural and electrical properties.” Materials and Design 32(1), 337-342, 2011.

116. I. M. De Rosa, C. Santulli, F. Sarasini, “Mechanical characterization of untreated waste office paper/woven jute fabric hybrid reinforced epoxy composites.” Journal of Applied Polymer Science, 119(3), 1366-1373, 2011.

117. I. M. De Rosa, F. Sarasini, “Use of PVDF as acoustic emission sensor for in situ monitoring of mechanical behaviour of glass/epoxy laminates.” Polymer Testing, 29(6), 749-758, 2010.

118. A. Caruso, I. M. De Rosa, C. Santulli, F. Sarasini, “Planar indentation of jute/hemp fibre hybrid laminates.” E-Journal of Nondestructive Testing, 15(7), July 2010.

119. I. M. De Rosa, J. M. Kenny, D. Puglia, C. Santulli, F. Sarasini, “Tensile behavior of new Zealand flax (Phormium tenax) fibers.” Journal of Reinforced Plastics and Composites, 29 (23) , 3450-3454, 2010.

120. H. Md. Akil, I. M. De Rosa, C. Santulli, F. Sarasini, “Flexural behaviour of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission.” Materials Science and Engineering A, 527(12), 2942-2950, 2010.

121. I. M. De Rosa, C. Santulli, F. Sarasini, “Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers.” Materials and Design, 31(5), 2397-2405, 2010.

122. I. M. De Rosa, J. M. Kenny, D. Puglia, C. Santulli, F. Sarasini, “Morphological, thermal and mechanical characterization of okra (Abelmoschus Esculentus) fibres as potential reinforcement in polymer composites.” Composites Science and Technology, 70(1), 116-122, 2010.

123. I. M. De Rosa, A. Dinescu, F. Sarasini, M. S. Sarto, A. Tamburrano, “Effect of short carbon fibers and MWCNTs on microwave absorbing properties of polyester composites containing nickel coated carbon fibers.” Composites Science and Technology, 70(1), 102-109, 2010.

124. C. Santulli, G. Jeronimidis, I. M. De Rosa, F. Sarasini, “Mechanical and falling weight impact properties of unidirectional phormium fibre/epoxy laminates.” eXPRESS Polymer Letters, 3(10), 650-656, 2009.

125. I. M. De Rosa, C. Santulli, F. Sarasini, “Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review.” Composites Part A, 40(9), 1456-1469, 2009.

126. E. M. Agresti, C. Caneva, I. M. De Rosa, F. Sarasini, M. Valente, “Effect of jute fibres on post-impact behaviour of E-glass reinforced composites assessed through acoustic emission.” International Journal of Materials and Product Technology, 36(1-4), 30-46, 2009.

127. C. Caneva, I. M. De Rosa, C. Santulli, F. Sarasini, “Effect of untreated celery fibres on epoxy matrix composites.” International Journal of Materials and Product Technology, 36(1-4), 20-29, 2009.

128. I. M. De Rosa, C. Santulli, F. Sarasini, “Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission and IR thermography.” E-Journal of Nondestructive Testing, 14(5), May 2009.

129. I. M. De Rosa, C. Santulli, F. Sarasini, M. Valente, “Post-impact damage characterization of hybrid configurations of jute/glass polyester laminates using acoustic emission and IR thermography.” Composites Science and Technology, 69(7-8), 1142-1150, 2009.

130. I. M. De Rosa, R. Mancinelli, F. Sarasini, M. S. Sarto, A. Tamburrano, “Electromagnetic Design and Realization of Innovative Fiber-Reinforced Broad-Band Absorbing Screens.” IEEE Transactions on Electromagnetic Compatibility, 51(3), 700-707, 2009.

131. L. Dalu, I. M. De Rosa, C. Santulli, F. Sarasini, “Acoustic emission monitoring of cyclic flexural tests on phormium/epoxy composites.” E-Journal of Nondestructive Testing, 14(2), February 2009.

132. I. M. De Rosa, C. Santulli, F. Sarasini, M. Valente, “Effect of loading-unloading cycles on impact-damaged jute/glass hybrid laminates.” Polymer Composites 30(12), 1879-1887, 2009.

133. I. M. De Rosa, C. Santulli, F. Sarasini, “Natural Fiber Composites Monitored by Acoustic Emission.” Journal of Acoustic Emission 26, 220-228, 2008.

134. C. Caneva, I. M. De Rosa, F. Sarasini, “Monitoring of impacted aramid-reinforced composites by embedded PVDF acoustic emission sensors.” Strain 44(4), 308-316, 2008.

135. I. M. De Rosa, F. Sarasini, M. S. Sarto, A. Tamburrano, “EMC Impact of Advanced Carbon Fiber/Carbon Nanotube Reinforced Composites for Next-Generation Aerospace Applications.” IEEE Transactions on Electromagnetic Compatibility, 50(3), 556-563, 2008.

136. C. Caneva, I. M. De Rosa, F. Sarasini, “Acoustic emission monitoring of flexurally loaded aramid/epoxy composites by embedded PVDF sensors.” Journal of Acoustic Emission 25, 80-91, 2007.


RIVISTE NAZIONALI

1. F. Sarasini, J. Tirillò, A. Zuorro, G. Maffei, R. Lavecchia, T. Valente, D. Puglia, F. Dominici, F. Luzi, L. Torre, “Biocompositi: una strategia di valorizzazione di scarti agroindustriali.” Compositi magazine, 46, 52-57, December 2017.

2. C. Scarponi, L. Lampani, P. Gaudenzi, F. Sarasini, J. Tirillò, T. Valente, “Impatti a bassa velocità di laminati epossidici rinforzati con fibra di canapa.” Compositi magazine, December 2016, 35-39.

3. M. Valente, J. Tirillò, F. Sarasini, “Miscele polimeriche di farina di legno con fibre di vetro riciclato.” Compositi magazine, June 2015, 9-14.

4. M.L. Santarelli, F. Sbardella, M. Zuena, M. Albè, G. Quattrociocchi, J. Tirillò, M. Valente, F. Sarasini, “Mortars more efficient with the basalt fibers.” Compositi magazine, September 2014, 7-14.

5. M. Valente, F. Sarasini, G. Pulci, F. Marra, J. Tirillò, C. Santulli, “Comportamento statico e dinamico di laminati ibridi.” Compositi magazine, December 2013, 51-60.

6. M. Bianco, G. Pulci, F. Marra, F. Sarasini, J. Tirillò, T. Valente, “Coatings nanostrutturati con tecniche thermal spray.” Trattamenti e Finiture, 42-47, February 2012.

7. C. Santulli, F. Sarasini, “L’emissione acustica per il monitoraggio dei laminati compositi.” Compositi magazine, 20, June 2011, 40-48.

8. C. Testani, C. Bartuli, F. Sarasini, T. Valente, “Comportamento meccanico in prove di fatica a caldo di compositi metallici a matrice di lega SP-700 rinforzata con fibre di Carburo di silicio tipo SCS-6”. La Metallurgia Italiana 7/8, 31-36, 2005.


CONVEGNI INTERNAZIONALI

1. F. Sarasini, J. Tirillò, L. Lampani and G. Cicala, “Effect of nonwoven veils and MWCNTs on the low velocity impact behaviour of Carbon/epoxy laminates”, Proceedings of the 1st European Conference on Crashworthiness of Composite Structures (ECCCS-1), 19-21 November 2019, Belfast, United Kingdom.

2. C. Sergi, J. Tirillò, F. Sarasini, P. Russo, E. Barbero Pozuelo, S. Sanchez Saez, “Cork core sandwich structures: Static and dynamic response”, Proceedings of the 22nd International Conference on Composite Materials (ICCM22), 11-16 August 2019, Melbourne, Australia.

3. M.C. Seghini, F. Touchard, F. Sarasini, V. Cech, L. Chocinski-Arnault, D. Mellier, J. Tirillò, M.P. Bracciale, M. Zvonek, “Tailoring interfacial adhesion in basalt fibre reinforced polymer composites”, Proceedings of the 22nd International Conference on Composite Materials (ICCM22), 11-16 August 2019, Melbourne, Australia.

4. F. Sbardella, M. Lilli, I. Bavasso, M.P. Bracciale, M.C. Seghini, L. Di Palma, J. Tirillò, F. Sarasini, “Hierarchical modification of flax fibres by zinc oxide nanostructures”, Proceedings of the 22nd International Conference on Composite Materials (ICCM22), 11-16 August 2019, Melbourne, Australia.

5. M. Lilli, F. Sbardella, I. Bavasso, M.P. Bracciale, M.C. Seghini, L. Di Palma, J. Tirillò, F. Sarasini, “Functionalization of basalt fibres by hydrothermal growth of zinc oxide nanostructures”, Proceedings of the 22nd International Conference on Composite Materials (ICCM22), 11-16 August 2019, Melbourne, Australia.

6. I. Rivilla, F. Sbardella, J. Tirillò, F. P. Cossío, F. Sarasini, “Synthesis of new peptides based on natural and non natural aminoacids possessing à la carte polarities for surface modification of natural fibers”, Proceedings of the 22nd International Conference on Composite Materials (ICCM22), 11-16 August 2019, Melbourne, Australia.

7. F. Sarasini, J. Tirillò, L. Ferrante, C. Sergi, P. Russo, G. Simeoli, A. Calzolari, “The impact resistance of thermoplastic fiber-metal laminates based on glass and basalt fibers”, Proceedings of the 33rd Annual Technical Conference and 18th US-Japan Conference on Composite Materials, September 24-26, 2018, Seattle, USA.

8. F. Sarasini, J. Tirillò, L. Ferrante, C. Sergi, P. Russo, G. Simeoli, A. Calzolari, “Effect of fiber type and temperature on the low velocity impact performance of thermoplastic fiber metal laminates”, Proceedings of the 21st International Conference on Composite Structures (ICCS21), Bologna, Italy, September 4-7, 2018

9. J. Tirillò, F. Sarasini, L. Di Fausto, C. Gonzalez, A. Fernandez, C.S. Lopes, “Effect of thermal and strength regeneration treatments on the mechanical performance of basalt”, Proceedings of the 4th International Conference on Mechanics of Composites (MechComp2018), Madrid, Spain, July 9-12, 2018

10. J. Tirillò, F. Sarasini, L. Di Fausto, C. Gonzalez, A. Fernandez, C.S. Lopes, “Recycled basalt fibres: fracture toughness evaluation and strength regeneration”, Proceedings of the 18th European Conference on Composite Materials (ECCM18), Athens, Greece, June 24-28, 2018

11. M.C. Seghini, F. Sarasini, J. Tirillò, M.G. Santonicola, R. Lavecchia, A. Zuorro, G. Maffei, T. Valente, F. Touchard, L. Chocinski-Arnault, D. Mellier, M. Zvonek, V. Cech, “Assessment of interfacial adhesion of flax yarns in thermoset matrices: effect of different surface modification treatments”, Proceedings of the 18th European Conference on Composite Materials (ECCM18), Athens, Greece, June 24-28, 2018

12. A. Calzolari, F. Sarasini, J. Tirillò, L. Lampani, “Effect of temperature and MWCNTs on low velocity impact response of CFRP laminates”, Proceedings of the 18th European Conference on Composite Materials (ECCM18), Athens, Greece, June 24-28, 2018

13. F. Sarasini, J. Tirillò, G. Maffei, A. Zuorro, R. Lavecchia, M. Abdelhak, “Enzyme-Assisted Extraction of Fibres from Ampelodesmos mauritanicus and Mechanical Characterization of their Composites”, Proceedings of the 9th International Conference – Times of Polymers & Composites, Island of Ischia, Italy - June 17-21, 2018

14. F. Sarasini, J. Tirillò, L. Lampani, C. Sergi, P. Russo, F. Cimino, G. Simeoli, P.J. Liotier, “A comparative study of the impact behaviour of cork-based sandwich structures with different skins”, Proceedings of the International Symposium on Dynamic Response and Failure of Composite Materials (Draf2018), Island of Ischia, Italy - June 12-15, 2018

15. H. Zhang, S. Sfarra, A. Osman, U. Netzelmann, C. Ibarra-Castanedo, S. Perilli, F. Sarasini, X. Maldague, “Eddy Current Pulsed Thermography for Basalt-Carbon Hybrid Composites Subjected to Ballistic Impacts: A Numerical and Experimental Study”, Proceedings of the 14th International Workshop on Advanced Infrared Technology and Applications (AITA 2017), Quebec City – Canada, 27-29 September 2017.

16. M.C. Seghini, F. Sarasini, J. Tirillò, M.G. Santonicola, R. Lavecchia, A. Zuorro, G. Maffei, T. Valente, F. Touchard, L. Chocinski-Arnault, V. Cech, “Enzymatic and plasma surface modification treatments of flax fibres”, Proceedings of the 6th International Conference on Innovative Natural Fibre Composites for Industrial Applications, Rome – Italy, 4-7 October 2017.

17. F. Sarasini, J. Tirillò, L. Lampani, C. Scarponi, T. Valente, P. Gaudenzi, “Dynamic behaviour of agglomerated cork and related green sandwich structures”, Proceedings of the 6th International Conference on Innovative Natural Fibre Composites for Industrial Applications, Rome – Italy, 4-7 October 2017.

18. F. Sarasini, J. Tirillò, C. Sergi, M.C. Seghini, V. Fiore, T. Scalici, “Durability of basalt/hemp hybrid composites”, Proceedings of the 6th International Conference on Innovative Natural Fibre Composites for Industrial Applications, Rome – Italy, 4-7 October 2017.

19. M.C. Seghini, J. Tirillò, F. Sarasini, T. Valente, “Tensile behaviour of basalt fibres after thermal treatment”, Proceedings of the 21st International Conference on Composite Materials (ICCM21), Xi’an – China, 20-25 August 2017.

20. F. Sarasini, J. Tirillò, C. Sergi, M.C. Seghini, V. Fiore, T. Scalici, “Effect of accelerated ageing on the mechanical behaviour of basalt/hemp hybrid composites”, Proceedings of the 25th International Conference on Composites/Nano-Engineering (ICCE 25), Rome, Italy, 16-22 July 2017.

21. P. Russo, V. Lopresto, A. Langella, M.R. Ricciardi, V. Antonucci, J. Tirillò, F. Sarasini, M.C. Seghini, I. Papa, ”Impact response of hybrid twill laminates made of basalt/flax fibres”, Proceedings of the 25th International Conference on Composites/Nano-Engineering (ICCE 25), Rome, Italy, 16-22 July 2017.

22. M.C. Seghini, F. Sarasini, J. Tirillò, M.G. Santonicola, R. Lavecchia, A. Zuorro, G. Maffei, T. Valente, F. Touchard, L. Chocinski-Arnault, V. Cech, “Effect of different surface modification treatments on mechanical properties of flax yarns”, Proceedings of the MoDeSt Workshop on Nano Materials and Bio Materials for the next decade, Pantelleria Island, Italy, 5-7 July 2017.

23. J. Tirillò, M. C. Seghini, F. Sarasini, T. Valente, “Effect of thermal conditioning on tensile behaviour of basalt fibres”, Proceedings of the 7th International Workshop on Flow and Fracture of Advanced Glasses, Aalborg – Denmark, 2-5 July 2017.

24. F. Sarasini, J. Tirillò, A. Zuorro, R. Lavecchia, G. Maffei, T. Valente, D. Puglia, F. Dominici, L. Torre, “Coffe by-product as a low cost filler for new biodegradable composites”, Proceedings of the 3rd International Conference on Natural Fibers (ICNF2017), June 21-23, 2017, Braga, Portugal.

25. H. Zhang, S. Sfarra, F. Sarasini, C. Ibarra-Castanedo, X. Maldague, “Comparative study of impact damage in basalt-carbon hybrid composites using infrared thermography and ultrasonic C-scan”, Proceedings of the 2nd Asian Conference on Quantitative Infrared Thermography (QIRT), Daejeon – South Korea, 2-6 July 2017.

26. D.A. Derusova, V.P. Vavilov, S. Sfarra, F. Sarasini, N.V. Druzhinin, V.O. Nekhoroshev, “High-efficient ultrasonic vibrothermography: using resonance piezoelectric transducers for detecting impact damage in graphite/epoxy composites”, Proceedings of Thermosense: Thermal Infrared Applications XXXIX, Baltimore – USA, 10 – 13 April 2017.

27. H. Zhang, S. Sfarra, M. Genest, F. Sarasini, H. Fernandes, S. Perilli and X. Maldague, “Numerical and experimental analyses for natural and non-natural impact composites via thermographic inspection, ultrasonic C-scan and terahertz spectroscopy”, Proceedings of Thermosense: Thermal Infrared Applications XXXIX, Baltimore – USA, 10 – 13 April 2017.

28. H. Zhang, S. Sfarra, C. Ibarra-Castanedo, F. Sarasini, J. Tirillò, N.P. Avdelidis, J. Fiorelli, D. Sartori, S. Perilli, X.P.V. Maldague, “Post-impact non-destructive evaluation of homogeneous particleboards of sugarcane bagasse”, Proceedings of the ASNT Annual Conference, Long Beach – USA, 24-27 October 2016.

29. F. Sarasini, J. Tirillò, L. Lampani, E. Barbero, S. Sanchez-Saez, T. Valente, P. Gaudenzi, C. Scarponi, “Impact behaviour of green sandwich structures.” Proceedings of the International Symposium on Dynamic Response and Failure of Composite Materials (Draf2016), Island of Ischia (NA)-Italy, September 7-9. 2016.

30. P. Russo, F. Sarasini, L. Sorrentino, “Low-velocity impact behavior of thermoplastic laminates with graded interface strength.” Proceedings of the 2nd International Conference on Mechanics of Composites, July 11-14, 2016, Porto, Portugal (ISBN 978-88-7488-963-1; ISSN 2421-2822).

31. L. Sorrentino, P. Russo, F. Sarasini, J. Tirillò, F. Touchard, L. Chocinski-Arnault, D. Mellier, “Micro-CT analysis of interlaminar graded interface strength (IGIS) composites based on a thermoplastic matrix.” Proceedings of the 17th European Conference on Composite Materials (ECCM17), 26-30 June, 2016, Munich, Germany.

32. F. Sarasini, J. Tirillò, D. Puglia, F. Dominici, C. Santulli, T. Valente, L. Torre, K. Boimau, “Tensile and thermal properties of borassus/ramie fibre reinforced hybrid composites for orthoses.” Proceedings of the 14th International Symposium on Bioplastics, Biocomposites and Biorefining, May 31 – June 3, 2016, Guelph, Canada.

33. C. Scarponi, C. Santulli, F. Sarasini, J. Tirillò, “Green composites for aircraft interior panels.” Proceedings of the International Symposium on Sustainable Aviation (ISSA2016), 29 May – 1 June, 2016, Istanbul, Turkey.

34. F. Sarasini, J. Tirillò, C. Santulli, T. Valente, L. Lampani and P. Gaudenzi, “Falling-weight impact and post-impact flexural performance of hybrid flax/carbon laminates.” Proceedings of the 20th International Conference on Composite Materials (ICCM20), July 19-24, 2015, Copenhagen, Denmark.

35. D. S. de Vasconcellos, M. D'Auria, S. Iannace, L. Sorrentino, and F. Sarasini, “Poly(ethylene 2,6-naphthalate) - PEN as thermoplastic matrix for high performance woven composites.” Proceedings of the 20th International Conference on Composite Materials (ICCM20), July 19-24, 2015, Copenhagen, Denmark.

36. J. Tirillò, F. Sarasini, L. Ferrante, T. Valente, L. Lampani, P. Gaudenzi, E. Barbero, S. Sánchez-Sáez, “Effect of basalt fibre hybridization on high velocity impact behaviour of carbon/epoxy composites.” Proceedings of the 20th International Conference on Composite Materials (ICCM20), July 19-24, 2015, Copenhagen, Denmark.

37. L. Sorrentino, F. Sarasini, J. Tirillò, G. Simeoli, S. Iannace, P. Russo, “Interface strength gradation in thermoplastic composites: a new approach to increase the damage tolerance.” Proceedings of the 20th International Conference on Composite Materials (ICCM20), July 19-24, 2015, Copenhagen, Denmark.

38. P. Gaudenzi, D. Nardi, I. Chiappetta, S. Atek, L. Lampani, F. Sarasini, J. Tirillò, T. Valente, “Impact detection in composite laminate plates using an integrated piezoelectric sensor and actuator couple combined with wavelet-based features extraction approach.” Proceedings of SMART 2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, June 3-6, 2015, São Miguel, Azores, Portugal.

39. D.S. de Vasconcellos, L. Sorrentino, M, d’Auria, F. Sarasini, S. Iannace, “Impact Properties of Thermoplastic High Performance Woven Composites with Poly(ethylene 2,6-naphthalate) (PEN) Matrix.” Proceedings of the 12th International Conference on Textile Composites (TEXCOMP-12), May 26-29, 2015, North Carolina State University, College of Textiles, Raleigh, North Carolina, USA.

40. C. Scarponi, J. Tirillò, F. Sarasini, L. Lampani, P. Gaudenzi, “Damage tolerance of hemp fibre reinforced bio-based epoxy laminates subjected to low-velocity impact.” Proceedings of the 2nd International Conference on Natural Fibers (ICNF2015), April 27-29, 2015, São Miguel, Azores, Portugal.(ISBN: 978-989-98468-4-5)

41. F. Sarasini, J. Tirillò, T. Valente, C. Santulli, D. Puglia, J.M. Kenny, F. Dominici, M. Tofani, R. De Santis, L. Bartolomeo, G. Galeoto, “Polycaprolactone reinforced with natural fibres as potential biocomposite for orthoses.” Proceedings of the 2nd International Conference on Natural Fibers (ICNF2015), April 27-29, 2015, São Miguel, Azores, Portugal. (ISBN: 978-989-98468-4-5)

42. G. Simeoli, D. Acierno, L. Sorrentino, S. Iannace, F. Sarasini, J. Tirillò, L. Ferrante, M. Valente, T. Valente, P. Russo, “Comparison of low velocity impact behaviour of thermoplastic composites reinforced with glass and basalt woven fabrics.” Proceedings of the 16th European Conference on Composite Materials (ECCM16), June 22-26, 2014, Sevilla, Spain.

43. S. Sfarra, M. Regi, C. Santulli, F. Sarasini, J. Tirillò, A. Paoletti, D. Paoletti, “Studying the effect of environmental ageing on impacted composite materials: an innovative perspective through the use of non-destructive testing (NDT)”, Proceedings of the International Conference on Mechanics of Composite Materials, Riga – Latvia, 2-6 June 2014.

44. S. Sfarra, D. Paletti, C. Ibarra-Castanedo, A. Bendada, X. Maldague, C. Santulli, F. Sarasini, “Post-impact damage characterization of pultruded jute/glass hybrid composites using infrared vision and optical techniques.” Proceedings of the 16th International Symposium on Applied Electromagnetics and Mechanics, July 31-August 2, 2013, Québec City, Canada.

45. L. Ferrante, F. Sarasini, J. Tirillò, M. Valente, T. Valente, S. Cioffi, S. Iannace, L. Sorrentino, “Effect of basalt fibre hybridization on the low velocity impact behaviour of woven carbon fibre/epoxy laminates.” Proceedings of the 19th International Conference on Composite Materials, July 28-August 2, 2013, Montréal, Canada.

46. D. S. De Vasconcellos, F. Sarasini, M. Pucci, F. Touchard, L. Chocinski-Arnault, C. Santulli, J. Tirillò, “Influence of low velocity impact on the fatigue behavior of woven hemp/epoxy composite.” Proceedings of the 19th International Conference on Composite Materials, July 28-August 2, 2013, Montréal, Canada.

47. S. Iacobellis, C. Scarponi, F. Sarasini, C. Santulli, “Design of a naca cowling in woven hemp fabric reinforced epoxy.” Proceedings of the 1st International Conference on Natural Fibers, June 9-11, 2013, Guimarães, Portugal.

48. L. Paglia, J. Tirillò, F. Marra, G. Pulci, F. Sarasini, T. Valente, “Carbon-phenolic ablative materials for re-entry space vehicles: manufacturing, properties and plasma wind tunnel test.” Proceedings of the 4th International ARA days, May 27-29, 2013, Arcachon, France.

49. S. Sfarra, C. Ibarra-Castanedo, C. Santulli, F. Sarasini, D. Paoletti, X. Maldague, “Optical and infrared monitoring techniques applied to the defects detection after indentation of jute/hemp fibre hybrid laminates.” Proceedings of the 15th International Conference on Experimental Mechanics (ICEM15), July 22-27, 2012, Porto, Portugal.

50. D. Puglia, A. Iannoni, J. M. Kenny, C. Santulli, F. Sarasini, T. Valente, “Thermal and mechanical behaviour of Phormium tenax reinforced polypropylene composites.” Proceedings of the 15th European Conference on Composite Materials (ECCM15), June 24-28, 2012, Venice, Italy.

51. R. Petrucci, E. Nisini, D. Ghelli, C. Santulli, D. Puglia, F. Sarasini, G. Minak, J. M. Kenny, “Mechanical and impact characterisation of hybrid composite laminates based on flax, hemp, basalt and glass fibers produced by vacuum infusion.” Proceedings of the 15th European Conference on Composite Materials (ECCM15), June 24-28, 2012, Venice, Italy.

52. A. P. Caruso, M. Infantino, E. Nisini, D. Ghelli, C. Santulli, F. Sarasini, G. Minak, Falling weight impact characterisation of jute cloth/wool felts hybrid laminates.” Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, June 18-20, 2012, Turin, Italy.

53. S. Sfarra C. Ibarra-Castanedo, C. Santulli, A. Paoletti, D. Paoletti, F. Sarasini, A. Bendada, X. Maldague, “Effect of fiber reinforcement on the low velocity impact behavior of woven fabric reinforced composites: integrated contribution of the thermographic, interferometric and speckle inspections.” Proceedings of the16th International Conference on Composite Structures (ICCS16), June 28-30, 2011, Porto, Portugal.

54. G. Pulci, J. Tirillò, F. Marra, F. Sarasini, F. Casadei, T. Valente, “High Temperature Oxidation Resistance of Modified MCrAlY Coatings for Thermal Barrier Systems.” Proceedings of the 25th International Conference on Surface Modification Technologies, June 20-22, 2011, Trollhättan, Sweden.

55. I. M. De Rosa, A. Iannoni, J. M. Kenny, D. Puglia, C. Santulli, F. Sarasini, A. Terenzi, “Environmentally friendly poly(lactic acid)/phormium tenax composite: thermal and mechanical characterization.” Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

56. S. Carmisciano, I. M. De Rosa, F. Sarasini, M. Valente, “Characterization of basalt fibre reinforced vinylester composites: an overview.” 2nd International Conference on Innovative Natural Fibre Composites for Industrial Applications, April 15-18, 2009, University of Rome “La Sapienza”, Rome, Italy. (Poster)

57. C. Caneva, I. M. De Rosa, C. Santulli, F. Sarasini, “AE monitoring of mechanical tests on plant fibre composites.” Proceedings of the 28th European Conference on Acoustic Emission Testing, September 17-19, 2008, Krakow, Poland.

58. C. Caneva, I. M. De Rosa, C. Santulli, F. Sarasini, “Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission.” Proceedings of the 13th European Conference on Composite Materials (ECCM-13), June 2-5, 2008, KTH, Stockholm, Sweden.

59. I.M. De Rosa, F. Sarasini, M. S. Sarto, “Effective properties of carbon fiber composites: EM modeling versus experimental.” Proceedings of the 2007 IEEE International Symposium on Electromagnetic Compatibility, 8-13 July 2007, Honolulu, Hawaii (USA).

60. I. M. De Rosa, C. Caneva, F. Sarasini, M. S. Sarto, A. Tamburrano, “Electromagnetic design and fabrication of advanced carbon fiber composites filled with CNTs.” Proceedings of the 15th International Conference on Composites /Nano Engineering (ICCE15), Haikou, Hainan Island, China, 15-21 July 2007.

61. C. Caneva, I. M. De Rosa, F. Sarasini, “Embedded PVDF sensors for impact and AE detection in composite structures.” Proceedings of the 13th International Conference on Experimental Mechanics (ICEM 13), Alexandroupolis, Greece, July 1-6, 2007 (E.E. Gdoutos Editor, Springer, ISBN 978-1-4020-6238-4).

62. C. Caneva, I. M. De Rosa, F. Sarasini, “Damage mechanisms in loaded aramid composites by means of embedded PVDF acoustic emission sensors.” Advanced Materials Research , Vol. 13-14, pp.337-342, 2006. (Proceedings of the 27th European Conference on Acoustic Emission Testing, September 20-22, 2006, Cardiff, UK).

63. M. S. Sarto, C. Caneva, I. M. De Rosa, F. Sarasini, F. Sarto, A. Tamburrano, “Design and realization of transparent absorbing shields for RF EM fields.” Proceedings of the 2006 IEEE AP-S International Symposium with USNC/URSI National Radio Science and AMEREM Meetings, July 9-14, Albuquerque, New Mexico USA.

64. F. Sarasini, E. M. Agresti, C. Caneva, I. M. De Rosa, M. Valente, “Acoustic emission analysis of new impact-damaged jute and glass fibre hybrid laminates.” Proceedings of the 14th International Conference on Composites /Nano Engineering (ICCE14), July 2-8 2006, Boulder, Colorado USA.

65. C. Caneva, I. M. De Rosa, F. Sarasini “Monotonic tensile and flexural loading behavior of glass/epoxy laminate embedded with piezopolymeric (PVDF) acoustic emission transducers.” Proceedings of the 5th International Workshop on Structural Health Monitoring, September 12-14, 2005 – Stanford University (CA), USA, pp.1103-1110.

66. C. Caneva, F. Domenichini, F. Sarasini “Structural integrity monitoring of composite laminates using embedded acoustic emission polymeric transducers.” Proceedings of the 2nd European Workshop on Structural Health Monitoring, July 7-9, 2004 Munich (Germany), pp.1219-1226.


CONVEGNI NAZIONALI

1. S. Morelli, N. Antolotti, G. Bolelli, O. Ligabue, L. Lusvarghi, F. Marra, P. Puddu, G. Pulci, F. Sarasini, V. Testa, “High-temperature erosion of suspension plasma sprayed thermal barrier coatings”, Proceedings of the XII Convegno Nazionale INSTM and XV Convegno Nazionale AIMAT, July 21-24, 2019, Ischia (NA), Italy.

2. E. Rossi, M. Sebastiani, R. Moscatelli, M. Lilli, J. Tirillò, F. Sarasini, T. Valente, E. Bemporad, “Micro-nano scale characterization of thermally treated single basalt fibres”, Proceedings of the XII Convegno Nazionale INSTM and XV Convegno Nazionale AIMAT, July 21-24, 2019, Ischia (NA), Italy.

3. V. Lopresto, I. Papa, A. Langella, M.R. Ricciardi, V. Antonucci, F. Sarasini, J. Tirillò, M.C. Seghini, V. Pagliarulo, P. Ferraro, P. Russo, “Damage behaviour of basalt/epoxy laminated structures under dynamic conditions”, Proceedings of the XXIII Congresso dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA 2017), Salerno, Italy, 4-7 September 2017.

4. P. Russo, F. Cimino, I. Papa, A. Langella, F. Sarasini, J. Tirillò, G. Simeoli, V. Lopresto, “Mechanical and low-velocity impact behavior of polypropylene composite laminates reinforced with a poly(lactic acid)/flax fabric”, Proceedings of XXIII Congresso dell’ Associazione Italiana di Meccanica Teorica e Applicata (AIMETA 2017), Salerno, Italy, 4-7 September 2017.

5. F. Sarasini, J. Tirillò, L. Lampani, T. Valente, P. Gaudenzi, A. Calzolari, “Effect of temperature on the low velocity impact response of green sandwich structures”, Proceedings of the XXIII Congresso dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA 2017), Salerno, Italy, 4-7 Semptember 2017.

6. M.C. Seghini, J. Tirillò, F. Sarasini, T. Valente, “Mechanical properties of thermally-treated basalt fibres”, Proceedings of the XI Convegno Nazionale INSTM sulla Scienza e Tecnologia dei Materiali e del XIV Convegno Nazionale AIMAT, Ischia, Italy, 12-15 July 2017.

7. M. Valente, J. Tirillò, F. Sarasini, C. Santulli, L. Ferrante, T. Valente, S. Cioffi, L. Sorrentino, S. Iannace, “Toughening of carbon fibre reinforced laminates through different configurations of interlayered basalt fibre laminates.” Proceedings of the IX INSTM Conference, Bari, 30th June-3rd July 2013 (Poster).

8. L. Baiamonte, L. Paglia, G. Pulci, F. Marra, J. Tirillò, F. Sarasini, L. Ferrante, T. Valente, “High temperature mechanical characterization of innovative ceramic materials for thermal barrier coatings.” Proceedings of the IX INSTM Conference, Bari, 30th June-3rd July 2013 (Poster).

9. J. Tirillò, G. Pulci, F. Marra, F. Sarasini, C. Bartuli, T. Valente, “Caratterizzazione termochimica e modellizzazione agli elementi finiti di scudi termici ablativi.” Proceedings of the XI Convegno Nazionale AIMAT, Gaeta (LT) 16-19 Settembre, 2012, 511-514. ISBN 978-88-97930-037

10. C. Santulli, F. Sarasini. J. Tirillò, T. Valente, M. Valente, L. Ferrante, A.P. Caruso, M. Infantino, “Uso di feltri in lana cardata abbinati a tessuti di juta per compositi ibridi.” Proceedings of the XI Convegno Nazionale AIMAT, Gaeta (LT) 16-19 Settembre, 2012, 471-474. ISBN 978-88-97930-037

11. F. Marra, M. Tului, R. Pileggi, G. Pulci, J. Tirillò, F. Sarasini, C. Bartuli, M. Valente, T. Valente, “Rivestimenti ceramici di nuova generazione per termodeposizione plasma.” Proceedings of the XI Convegno Nazionale AIMAT, Gaeta (LT) 16-19 Settembre, 2012, 339-342. ISBN 978-88-97930-037.

12. I. M. De Rosa, C. Santulli, F. Sarasini, “Caratterizzazione non distruttiva del danneggiamento ad impatto di compositi in fibra naturale.” Atti della Conferenza Nazionale sulle Prove Non Distruttive, Monitoraggio e Diagnostica, 14° Congresso AIPnD, Firenze 26-28 Ottobre, 2011.

13. I. M. De Rosa, F. Marra, G. Pulci, C. Santulli, F. Sarasini, J. Tirillò, M. Valente, T. Valente: “Comportamento dinamico di laminati compositi ibridi basalto/vetro con diverse sequenze di stratificazione: risultati preliminari”. Atti del 10° Convegno AIMAT, Capo Vaticano (VV) 5-8 Settembre 2010. ISBN 9788874581146, p.225-228.

14. C. Caneva, I. M. De Rosa, C. Santulli, F. Sarasini, “Misure di localizzazione bidimensionale in Emissione Acustica su composito in polipropilene di riciclo e fibra di canapa.” Conferenza Nazionale sulle Prove Non Distruttive, Monitoraggio e Diagnostica, 13° Congresso AIPnD, Roma 15-17 Ottobre, 2009.

15. S. Carmisciano, I. M. De Rosa, F. Marra, G. Pulci, F. Sarasini, J. Tirillò, M. Valente, “Comparison between basalt and glass fibre reinforced vinylester composites: post-impact behaviour. VII Convegno Nazionale INSTM sulla Scienza e Tecnologia dei Materiali, 9-12 Giugno 2009, Tirrenia (PI). (Poster)

16. M. S. Sarto, C. Caneva, I. M. De Rosa, F. Sarasini, F. Sarto, A. Tamburrano, “Nuovo schermo radar assorbente trasparente nel visibile.” Atti del IV Simposio sulle tecnologie avanzate: Nuovi orizzonti teorici e applicativi, 21-22 Giugno 2007, Roma.

17. A. Balzano, C. Caneva, I. M. De Rosa, R. Mancinelli, M. Pagliuca, M. S. Sarto, F. Sarasini, “Nuovi Materiali Radar Assorbenti a Larga Banda.” Atti del III Simposio sulle tecnologie avanzate: Utilizzo e Applicazioni, 22-23 Giugno 2006, Roma.


CAPITOLI DI LIBRI

1. C. Santulli, F. Sarasini, “Acoustic Emission for Low Velocity Impact Damage Characterization on Polymer Composites” (Chapter) in Theory and Uses of Acoustic Emissions by Justin K. Burnett, Nova Science Publishers, 163-184, 2012. ISBN: 978-1-61209-960-6.

2. A. G. D’Aloia, A. Tamburrano, G. De Bellis, J. Tirillò, F. Sarasini, and M. S. Sarto, “Electromechanical Modeling of GNP Nanocomposites for Integrated Stress Monitoring of Electronic Devices” (Chapter) in Nanoelectronic Device Applications Handbook by James E. Morris and Krzysztof Iniewski, Taylor & Francis Group, LLC - CRC Press, 209-221, 2013.

3. F. Sarasini, C. Santulli, “Vinylester resins as a matrix material in advanced fibre-reinforced polymer (FRP) composites” (Chapter) in Advanced fibre-reinforced polymer (FRP) composites for structural applications by Jiping Bai, Woodhead Publishing Series in Civil and Structural Engineering No. 46, 69-87, 2013. ISBN 0 85709 418 1.

4. C. Santulli, F. Sarasini, “Thermosetting Biopolymers Reinforced with Natural Fibres: A Review” (Chapter) in New Developments in Polymer Composites Research by Stephan Laske and Andreas Witschnigg, Nova Science Publishers, 197-212, 2014. ISBN 978-1-62948-340-5.

5. F. Sarasini, C. Santulli, “Non-destructive testing (NDT) of natural fibre composites: acoustic emission technique” (Chapter) in Natural fibre composites: Materials, processes and properties by Alma Hodzic and Robert Shanks, Woodhead Publishing Series in Composites Science and Engineering No. 47, 273-302, 2014. ISBN 2052-5281.

6. C. Santulli, F. Sarasini, E. Fortunati, D. Puglia, J. M. Kenny, “Okra fibres as potential reinforcement in biocomposites” (Chapter) in Biomass and Bioenergy: Processing and Properties by Khalid Rehman Hakeem, Mohammad Jawaid, Umer Rashid, Springer, 175-190, 2014. ISBN 978-3-319-07640-9.

7. D. Puglia, F. Sarasini, C. Santulli, J.M. Kenny, “Manufacturing of natural fiber/agrowaste based polymer composites” (Chapter) in Green Biocomposites, Manufacturing and Properties by Mohammad Jawaid, Salit Mohd Sapuan, Othman Y. Alothman, Springer, 125-147, 2017. ISBN 978-3-319-46609-5.

8. F. Sarasini, “Thermoplastic biopolymer matrices for biocomposites” (Chapter) in Biocomposites for high performance applications by Dipa Ray, Woodhead Publishing, 81-123, 2017. ISBN 978-0-08-100793-8.

9. F. Sarasini, “Fully biodegradable all-cellulose composites” (Chapter) in Handbook of composites from renewable materials, Volume 5: Biodegradable Materials by Vijay Kumar Thakur, Manju Kumari Thakur, Michael R. Kessler, Scrivener Publishing (Wiley), 303-322, 2017. ISBN 978-1-119-22379-5.

10. F. Sarasini, “Low-velocity impact behaviour of hybrid composites” (Chapter) in Hybrid polymer composite materials – Properties and Characterisation by Vijay Kumar Thakur, Manju Kumari Thakur, Asokan Pappu, Woodhead Publishing, 151-168, 2017. ISBN 978-0-08-100787-7.

11. S. Sfarra, F. Lopez, F. Sarasini, J. Tirillò, L. Ferrante, S. Perilli, C. Ibarra-Castanedo, D Paoletti, L. Lampani, E. Barbero, S. Sanchez-Saez, X. Maldague, “Analysis of damage in hybrid composites subjected to ballistic impacts: an integrated non-destructive approach” (Chapter) in Handbook of composites from renewable materials, Volume 3: Physico-Chemical and Mechanical Characterization by Vijay Kumar Thakur, Manju Kumari Thakur, Michael R. Kessler, Scrivener Publishing (Wiley), 175-210, 2017. ISBN 978-1-119-22366-5.

12. C. Santulli, F. Sarasini, D. Puglia, J.M. Kenny, “Injection moulding of plant/fibre composites” (Chapter) in Advanced Composite Materials: Properties and Applications by Ehsan Bafekrpour, De Gruyter, 420-439, 2017. ISBN 978-3-11-057443-2.


BREVETTI

Brevetto italiano dal titolo: Schermo di campi elettromagnetici a radio frequenza, radar assorbente, trasparente nel visibile. 2006. N°. 102006901474680. Data concessione: 06-04-2010. Inventori: M.S. Sarto, C. Caneva, I.M. De Rosa, F. Sarasini, F. Sarto, A. Tamburrano.